Product Information:
The award-winning 710 Twin-Finity™ is a radically new UA
mic preamp design that combines both the classic retro warmth of tubes with the
transient bite of solid-state, all in a 2U, half-rack unit. The 710 was created
specifically to add the tonal versatility and sonic inspiration missing from
generic audio interface preamps. Tone blending is continually variable between
100% tube and 100% solid-state, offering a practically infinite range of unique
preamp tones, plus the ability to easily dial-in your own signature sound. There
are lots of sensibly priced solid-state and tube preamplifiers out there, but
the 710 is the only one that offers the best of both worlds — as well as
everything in-between — all in one box, and within reach of any serious project
studio’s budget.
Twin-Finity™ Tone-Blending Mic/Line Preamp & Hi-Z Instrument DI
Dual-Path 310 volt Class-A Tube and Transimpedance Solid State Preamp
Phase-Aligned "Tone-Blending" of Tube and Solid State sounds
Dual Gain Stages: Wire with Gain to Creamy to Crunchy
Discrete JFET DI with 2.2M ohm Ultra Hi-Z impedance
The key to its sonic flexibility lies in its innovative circuit design,
featuring a solid-state transimpedance input amp simultaneously driving
separate, phase-aligned tube and solid-state gain stages, which are then summed
to a single output.. The mix between the 310 volt single-ended class-A triode
tube stage and solid-state transimpedance stage is controlled via the "Blend
Knob" labeled "∞". Blending is continually variable between 100% tube and 100%
solid-state offering a practically infinite range of unique pre-amp tones and
the ability to easily dial-in your own signature sound.
Like all our other preamp designs, the 710 features dual gain-stage controls
(Gain/Level) which can radically vary the amount of coloration and distortion by
allowing you to crank up the input gain like a guitar amp. The VU meter features
a unique "Drive" mode allowing you to see how hard you are driving the input
stage.
Versatility makes the 710 the perfect preamp partner for any mic collection.
Plus, the discrete JFET DI input circuit can also easily handle any electric
instrument. Guitar and bass players will especially appreciate the 710s ability
to bring out the best of both active and passive pickups. The 710 Twin-Finity
includes a 19" rack-kit for mounting one or two units.
Specifications:
Twin-Finity™ Tone-Blending Mic/Line Preamp & Hi-Z
Instrument DI
Dual-Path 310 volt Class-A Tube and Transimpedance Solid State Preamp
Phase-Aligned "Tone-Blending" of Tube and Solid State
Dual Gain Stages: Wire with Gain to Creamy to Crunchy
Discrete JFET DI with 2.2M ohm Ultra Hi-Z impedance
Monolithic Balanced Output Stage
70dB+ of gain, +48V Phantom, Pad(-15dB), Phase Invert, and Low Cut Filter(75Hz)
Output and "Drive" backlit VU metering
Portable, Rack-Mountable design for Studio, Desktop or Stage
19” Rack Kit Included, Optional Desktop Handle Kit also available
Front Panel Hi-Z Input (switched from Mic/Line automatically via Jack Detect)
Rear Panel XLR Mic Input, XLR Line Input and XLR Line Output
Universal Internal Power Supply
Heavy-Duty Metal Construction
Technical Specifications:
Inputs
Microphone (Female XLR)
Balanced Line (Female XLR)
Unbalanced Instrument (1/4" jack) (D.I.)
Outputs
Balanced Line (Male XLR)
Type
Tube & Solid-State Phase-Aligned Tone-Blending Mic Pre & DI
Tube Complement
12ax7
Pad
-15dB
High Pass Filter
75Hz
Maximum Power Consumption
160mA @120VAC
20W
Power Requirements
100-240VAC
Dimensions
8.45W x 3.5H x 10.25D
Weight
5.25 lb
Impedance:
Mic Input Impedance
2K ohms
Line Input Impedance
10K ohms
Hi-Z Input Impedance
2.2M ohms
Internal Output Impedance
600 ohms
Gain/Levels:
Gain Range for Unit
-Infinity to 70dBu
Mic Range Gain Pot
10 ~ 60 dBu
Line Range Gain Pot
-10 ~ 40 dBu
Hi-Z Range Gain Pot
-10 ~ 40 dBu
Maximum Mic Input Level Gain @min SS
+18 dBu
Maximum Mic Input Level Gain @min Tube 1% THD
-7 dBu dBu +8 dBu w/pad
Maximum Line Input Level Gain @ Min SS
+30
Maximum Line Input Level Gain @ Min Tube 1% THD
+8 dBu
Maximum Hi-Z Input Level Gain Min SS
+18
Maximum Hi-Z Input Level Gain Min Tube 1% THD
+8 dBu
Maximum Output Level into 600 ohms
+18 dBu
Maximum Output Level into 100k ohms
+28 dBu
Tube Clipping Level
Same as Max In
Solid-State Clipping Level
Same as Max In
Frequency Response:
Mic Frequency Response
20Hz to 100kHz +/- 0.2 dBu
Line Frequency Response
20Hz to 100kHz +/- 0.2 dBu
Hi-Z Frequency Response
20Hz to 100kHz +/- 0.2 dBu
Distortion
Min THD+Noise @ +4dBU
0.1% tube 0.005% solid-state
All orders over $100 will be automatically eligible for FREE Shipping Australia Wide, if you order is under $100 there will be a flat rate of $10.
Belfield Music is well known for its top online customer service. We treat all online customers with the same excellent service we give to our in store customer. We will ensure that you receive all the support you need while your goods are in transit and ensure the goods arrive promptly. All of our shipments have tracking numbers available and we cover every single unit by our own shipping insurance.
Online orders are normally processed within 1-3 business days. Once processed, your order should take between 1-8 business days to arrive depending on your location. Please note that your order may take up to 10 business days to arrive from the day you place your order.
If it transpires that the product is out of stock due to a stock discrepancy and/or there will be a delay in shipment, we will contact you within 2 business days of placing your order and give you the option of waiting or cancelling your order. The products we advertise online should show if they are in stock or not. We do our best to keep the website stock count up to date, but there may be an occasional error.
If you wish to utilize an Express Delivery Service to receive your item, please contact us for a shipping quote before you place your order at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.
Deliver is made during the hours from 8:00am till 5:30pm Monday to Friday. As such, please ensure you nominate an address which is capable of receiving goods during 8am and 5.30pm. Given the restrictions on PO Box deliveries we cannot deliver larger sized items to a PO Box.
If for any reason our selected carriers don't service your area we will contact you before processing your order if this applys to you.
If you wish to return an item which is not damaged or faulty in any way and you have simply changed your mind or made the wrong decision, you must let us know within 7 days of receiving the item. We will not agree to refund an item because you simply changed your mind or made the wrong decision if we have not been advised of your intention within 7 days of receiving your item. Once we have provided a return authority, it is the buyer’s responsibility to return the item, at their own costs within 30 days from original purchase. If the item is returned with any damage or alteration to its original packaging, we will refund the item subject to applying a minimum 15% restocking fee. We will not refund the costs of the initial shipping charges.
It is in Belfield Music best interests to keep our customers happy with their purchases. If you are not happy with your purchase, please talk to us first. We will always attempt to resolve any problems you may have as best we can. To contact us please email us at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.