SN-COMPADRE
Strymon Compadre Dual Voice Compressor and Boost Effects Pedal
Pay With
Product Information
Your Dream Tone Starts Here.
Start your signal chain with the best possible version of your guitar tone. Treat your guitar signal to true studio quality analog compression with two distinct voices for smooth transparency or vintage squeeze. Hit the Boost switch to add clean boost or soft-clipped dirty boost, with the EQ curve of your choice. Mix in some dry signal for natural attack even with extreme compression settings. Feel the perfectly tailored dynamic response, feeding your amp and effects just what they need to sound their best.
Your Everything Upgrade.
From pickups, tubes, capacitors, to speaker cabinets—the aspects of a rig that can be upgraded or changed are nearly endless. Plug in Compadre and you may find you already have everything you need for the tone you’ve been seeking.
Bring out your amp’s character in ways you never thought possible. Compadre’s Class A JFET input circuit, studio quality analog compression, and musically voiced analog boost circuits all work together to make your amp sound like it was just modified by a world-class boutique amp designer.
Super Flexible, Super Easy.
Sound Design
Vintage Inspiration, Modern Execution.
The Compadre design project started with a study of some of the finest analog compressors ever created, inspiring and guiding our circuit design process. Utilizing a VCA in the compression circuits allowed us to carefully tune the exact response and dynamics we desired for each voicing.
For Studio mode, our goal was to achieve the musical and transparent sound found within our favorite studio rack units and the best vintage studio console bus compression. Careful tuning of our detection circuit granted us exacting control over decay, especially important for Squeeze mode. With ample sustain on tap, we paid special attention to creating a completely smooth decay, with no unwanted pumping artifacts.
Two Distinct Analog Compression Circuits.
Boost the Sweet Spot, Clean or Dirty.
Independent Boost and Compression
For maximum versatility, Compadre allows you to use its Boost and Compression either together or independently from one another.
In this way Compadre is truly two pedals in one. Put that together with the ability to store and recall presets using MultiSwitch Plus or MIDI, and the possibilities are limitless.
Analog or Digital? We chose both.
From the Class A JFET input circuit, to the VCA-based compression, to the Clean Boost and the diode soft clipping Dirty Boost, every aspect of Compadre’s audio signal processing is fully analog, with premium quality components, design, and workmanship throughout. The audio signal is never converted to or from digital.
In Compadre, the digital aspect comes in the form of digital control and programmability. By converting digital control messages to analog control voltages, we can offer full MIDI control and recallable presets while preserving a completely analog signal path from end to end.
Specifications
- Premium analog VCA (Voltage Controlled Amplifier) compressor circuits
- Two voicing options: smooth studio compression and hard pedal style compression
- Independently controlled clean or dirty boost circuit with 3 EQ options
- Dirty boost option provides overdrive when boost is engaged
- DRY Knob lets you blend the dry signal with the compressed signal to preserve attack transients
- High impedance ultra low-noise discrete Class A JFET preamp input
- Low impedance mono output
- Output VCA allows Compadre to function as a volume pedal when a standard TRS expression pedal plugged into the dedicated Volume jack
- Compatible with MiniSwitch for remote selection of a Favorite preset
- Compatible with MultiSwitch Plus for remote selection of 3 presets
- Full featured MIDI control. Access to 300 presets and remote parameter control via quarter-inch TRS. (requires Strymon MIDI EXP Cable or MIDI > TRS interface)
- Selectable True Bypass (electromechanical relay switching) or ultra low-noise Buffered Bypass
- Strong and lightweight anodized dark red aluminum chassis
- 9V DC power supply included. Power requirements: maximum 9 volts DC center-negative, with a minimum of 150mA of current
- Compressor Signal/Noise: 109 dB typical
- Dimensions: 4.5” deep x 4” wide x 1.75” tall (11.4 cm deep x 10.2 cm wide x 4.4 cm tall)
- Designed and built in the USA
Warranty
1 Year WarrantyName:
Invoice/Order Number:
Item:
Fault Description:
Serial Number:
Email:
Contact Number:
Address:
Shipping Policy
All orders over $150 will be automatically eligible for FREE Shipping Australia Wide, if you order is under $150 there will be a flat rate of $10.
Belfield Music is well known for its top online customer service. We treat all online customers with the same excellent service we give to our in store customer. We will ensure that you receive all the support you need while your goods are in transit and ensure the goods arrive promptly. All of our shipments have tracking numbers available and we cover every single unit by our own shipping insurance.
Online orders are normally processed within 1-3 business days. Once processed, your order should take between 1-8 business days to arrive depending on your location. Please note that your order may take up to 10 business days to arrive from the day you place your order.
If it transpires that the product is out of stock due to a stock discrepancy and/or there will be a delay in shipment, we will contact you within 2 business days of placing your order and give you the option of waiting or cancelling your order. The products we advertise online should show if they are in stock or not. We do our best to keep the website stock count up to date, but there may be an occasional error.
If you wish to utilize an Express Delivery Service to receive your item, please contact us for a shipping quote before you place your order at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.
Deliver is made during the hours from 8:00am till 5:30pm Monday to Friday. As such, please ensure you nominate an address which is capable of receiving goods during 8am and 5.30pm. Given the restrictions on PO Box deliveries we cannot deliver larger sized items to a PO Box.
If for any reason our selected carriers don't service your area we will contact you before processing your order if this applys to you.
Returns Policy
If you wish to return an item which is not damaged or faulty in any way and you have simply changed your mind or made the wrong decision, you must let us know within 7 days of receiving the item. We will not agree to refund an item because you simply changed your mind or made the wrong decision if we have not been advised of your intention within 7 days of receiving your item. Once we have provided a return authority, it is the buyer’s responsibility to return the item, at their own costs within 30 days from original purchase. If the item is returned with any damage or alteration to its original packaging, we will refund the item subject to applying a minimum 15% restocking fee. We will not refund the costs of the initial shipping charges.
It is in Belfield Music best interests to keep our customers happy with their purchases. If you are not happy with your purchase, please talk to us first. We will always attempt to resolve any problems you may have as best we can. To contact us please email us at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.
