Your Cart is Empty


Lewitt Audio Connect 2 USB-C Audio Interface w/ DSP Effects

IN STOCK - Ships today if ordered before 1pm AEST

Pay With AfterPay Zip

Product Information

This interface is the most user-friendly audio interface, as it gives you everything you need to make your voice and instrument sound sensational with just a few clicks.

Sensational sound for your voice and instrument with just a few clicks.

CONNECT 2 delivers pristine sound quality and offers powerful yet easy-to-use tools that help you get sensational sound with just a few clicks. The microphone preamp comes with 72 dB of gain to work with every microphone without a signal booster. Run Autosetup and CONNECT 2 will guide you through a process to find your perfect settings and sound. To refine your sound, CONNECT 2 offers three iconic preamp sounds – Clear for perfect clarity, Warm for a vintage vibe, and Vivid for extra articulation. The Clipguard protects your signal from distorting, the Denoiser analyses your signal and gets rid of background noise, while the Compressor adds power and punch to your voice, just like your favorite record. What they all have in common is the combination of simplicity and sensational sound – one click is enough. This set of sound-shaping tools is fantastic for music, podcast, and streaming applications. As they run directly on the powerful signal processor (DSP) of CONNECT 2, you'll experience zero latency.

A touch-based user interface with mute for every channel.

CONNECT 2 has an intuitive user interface that offers touch-based capacitive controls for smooth level adjustments and precise visual metering. With the touch wheel in the center, you can control the microphone and instrument input, headphones, and monitor levels. Each input and output can be muted directly on the device. Autogain delivers perfect gain settings after a quick soundcheck. You can adjust the input/playback signal at any ratio for zero-latency monitoring. The Custom button lets you assign one of many workflow shortcuts like quickly switching from a recording to a monitoring scenario or bringing up the CONTROL CENTER with a single push.

Record your guitar with perfect clarity.

Connect your guitar to the Hi-Z instrument and enjoy a direct input signal that faithfully captures your performance. This differential input works with any guitar, from vintage single coils to modern active humbuckers, and the ground break loop circuit allows for enhanced hum immunity. As with the microphone channel, CONNECT 2 can automatically set the input gain after strumming your electric guitar for a few seconds. The tonal variety of the preamp sounds gives you much more flexibility than other audio interfaces or available DI box solutions, and the 1-click studio-quality Compressor is a great way to adapt the dynamics of your playing.

Enjoy the authentic sound of your headphones.

When recording and mixing, you need to trust what you hear. CONNECT 2's Zero-Ohm headphone outputs ensure an accurate listening experience and retain your headphones' frequency response. When using high-impedance studio headphones, you can activate the dedicated high-impedance mode to get the power you need to drive them. To save time looking for adapters, CONNECT 2 offers a headphone jack that comes in both sizes.


  • USB-C audio interface for music production, podcast, and streaming
  • User-friendly design to get the perfect sound with just a few clicks
  •  Intuitive touch-based user interface with LED metering incl. mute for every input and output
  •  Autosetup finds the perfect settings for you
  • Powerful microphone preamp with 72 dB gain and 118 dB dynamic range
  • Hi-Z instrument input with extra clarity, enhanced hum immunity, and 121 dB dynamic range
  •  Three iconic preamp sounds – Clear, Warm, Vivid
  • LEWITT’s Clipguard technology protects your signal from clipping
  • Single-click Compressor & Denoiser for professional sound
  • Zero-Ohm headphone output for authentic listening experience in two sizes (1x 3.5 mm & 1x 6.3 mm)
  • High-impedance mode for studio headphones
  • 2 balanced speaker outputs
  • Custom button for workflow shortcuts
  • Custom LED colors and brightness
  • Global mute function
  • Loopback channel to capture computer audio
  • DSP-powered for zero-latency effects and monitoring
  • CONTROL CENTER for full digital control
  • w/- Steinberg Cubase LE and Steinberg Cubasis LE
  • Compatible with Mac, Windows, and iOS
  • Record with up to 24 bit / 96 kH


  • Digital
  • USB-C, 44.1 / 48 / 96 kHz / 24 bit
  • Compatible with Mac, Windows, iOS
  • ASIO driver - Yes
  • DSP-powered – Yes
  • Loopback - Yes


Microphone preamp

  • Features: DSP (Autosetup, Low-cut filter, Clipguard, 3 iconic preamp sounds, Denoiser, Compressor, Autogain)
  • Connector: 3-pin XLR
  • Phantom power: 48 V
  • Gain range: 72 dB
  • Dynamic range: 118 dB (A)
  • Frequency response: 20 Hz – 20 kHz
  • Equivalent input noise: -129 dBV (A)
  • Total harmonic distortion + noise: 0.001% 

Hi-Z instrument channel

  • Features: DSP (Autosetup, Low-cut filter, Clipguard, 3 iconic preamp sounds, Denoiser, Compressor, Autogain)
  • Connector: 1/4-inch instrument jack
  • Gain range: 60 dB
  • Dynamic range: 121 dB (A) with Clipguard
  • Frequency response: 20 Hz – 20 kHz
  • Equivalent input noise: -108 dBV (A)
  • Total harmonic distortion + noise: 0.0008% 
  • Input impedance: 2.5 MOhm

Line out L/R

  • Features: High volume speaker mode, Mute, Volume, Map system volume controls
  • Connector: 6.35 mm (1/4 inch) balanced jack
  • Frequency response: 20 Hz - 20 kHz
  • Max output level: 12.2 dBV (high volume mode)
  • Total harmonic distortion + noise: 0.002%
  • Impedance: 200 Ohm


  • Features: High impedance headphone mode, Mute, Volume, Map system volume controls
  • Connector: 3.5 mm (1/8 inch) stereo jack, 6.3 mm (1/4 inch) stereo jack
  • Frequency response: 20 Hz - 20 kHz
  • Max output level: 6.8 dBV (high impedance mode)
  • Total harmonic distortion + noise: 0.003%
  • Impedance: 1.9 Ohm


Power requirements

  • Bus powered USB-C
  • Requires camera connection kit with iPhone and iPad


1 Year Warranty

Shipping & Delivery

All orders over $100 will be automatically eligible for FREE Shipping Australia Wide, if you order is under $100 there will be a flat rate of $10.

Belfield Music is well known for its top online customer service. We treat all online customers with the same excellent service we give to our in store customer. We will ensure that you receive all the support you need while your goods are in transit and ensure the goods arrive promptly. All of our shipments have tracking numbers available and we cover every single unit by our own shipping insurance.     

Online orders are normally processed within 1-3 business days. Once processed, your order should take between 1-8 business days to arrive depending on your location. Please note that your order may take up to 10 business days to arrive from the day you place your order. 

If it transpires that the product is out of stock due to a stock discrepancy and/or there will be a delay in shipment, we will contact you within 2 business days of placing your order and give you the option of waiting or cancelling your order. The products we advertise online should show if they are in stock or not. We do our best to keep the website stock count up to date, but there may be an occasional error.

If you wish to utilize an Express Delivery Service to receive your item, please contact us for a shipping quote before you place your order at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.           

Deliver is made during the hours from 8:00am till 5:30pm Monday to Friday. As such, please ensure you nominate an address which is capable of receiving goods during 8am and 5.30pm.  Given the restrictions on PO Box deliveries we cannot deliver larger sized items to a PO Box.

If for any reason our selected carriers don't service your area we will contact you before processing your order if this applys to you.

Returns Policy

If you wish to return an item which is not damaged or faulty in any way and you have simply changed your mind or made the wrong decision, you must let us know within 7 days of receiving the item.  We will not agree to refund an item because you simply changed your mind or made the wrong decision if we have not been advised of your intention within 7 days of receiving your item. Once we have provided a return authority, it is the buyer’s responsibility to return the item, at their own costs within 30 days from original purchase. If the item is returned with any damage or alteration to its original packaging, we will refund the item subject to applying a minimum 15% restocking fee.  We will not refund the costs of the initial shipping charges.

It is in Belfield Music best interests to keep our customers happy with their purchases. If you are not happy with your purchase, please talk to us first. We will always attempt to resolve any problems you may have as best we can. To contact us please email us at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.