Your Cart is Empty


Behringer UV1 Microphone Preamp Voice Processor w/ Audio Interface

IN STOCK - Ships today if ordered before 1pm AEST

Pay With AfterPay Zip

Product Information


When it comes to vocals, sound engineers become critical and often prefer a channel strip over a mixing console because of its outstanding sound quality and flexibility. The ULTRAVOICE UV1 is a full-featured channel strip with high-end microphone preamplifier, versatile sound processing features, and the free choice to play out the processed sound via balanced analog outputs or pass it on to the internal USB interface.

Midas Mic Preamp – Legend Inside!

Did you know that Midas is one of the most recognized brands used by audio professionals around the world? Now you can get the gear the pros use! ULTRAVOICE UV1 comes with a state-of-the-art Midas microphone preamplifier with +48 V phantom power, ultra-low noise, high gain and audiophile quality.

Crystal Clear Signal Path at 192 kHz

The ULTRAVOICE UV1 is more than just a mic preamp and voice processor – we added one of the best USB audio interfaces with the highest possible resolution and lowest latency. Full 192 kHz sampling rate at a clear 24-bit resolution will make you smile listening to the astonishingly crisp sound you’ll get.

Zero Latency Monitoring

Recording the voice is one of the most critical tasks in the studio. Singers are very sensitive to delays. A few milliseconds can make all the difference between a good or a great take! So, we added this simple but very effective monitoring section to the ULTRAVOICE UV1. Blend between direct input signal and USB playback makes it easy to find the best balance while you're recording. Just plug in your headphones and adjust the volume.

Digital or Analog? – Both!

Some people prefer to stay in the analog domain, some prefer the shorter path to record directly to the digital. On the ULTRAVOICE UV1 you will get both – simultaneously!

Connect your PC or Mac directly via USB to get the best vocal sound without detours into your DAW. Connect any analog outboard equipment to the balanced outputs for further signal flow. It’s up to you.

Sound P-R-O-C-E-S-S-I-N-G

A high-quality microphone preamp and a brilliant USB interface are the most important tools to integrate vocals perfectly into a song arrangement. Just press the BYPASS switch to get the pure experience.

But sometimes you want to pimp your vocals for the best result. And here we go! The ULTRAVOICE UV1 features all kind of processing you will need – a Compressor for more punch, a De-Esser to remove sibilants, an Enhancer for dynamic sound details at the lower and upper end of the frequency spectrum, an Expander/Gate to “mute” automatically unwanted surrounding noise and finally the amp to gain lost levels again.

And even if this would be not enough you can insert additional outboard gear for even more sound improvements.

Stage – Studio – Stream

It doesn’t matter what your target application is. The ULTRAVOICE UV1 is a perfect match for any environment where the best quality for your voice as a singer, narrator, moderator will be required. Put it in a live rack to go on tour, install it in a musical theater for the main artists, make it the center of your home studio or broadcast streaming environment, or unload your mixing console at the recording studio.

The ULTRAVOICE UV1 is the ideal solution for home or professional studios, or as part of a larger setup, on stage or on tour. Premium, ultra-low noise components and high headroom lets your music shine at its best – this is especially true for the most critical source: Vocals!

High Quality, Best Value

We designed the ULTRAVOICE UV1 to provide many years of super-clean, high-fidelity performance in the most critical listening environment – yours! Built from the highest-grade components, the UV1 is the perfect way to add a lot more convenience and control into your current studio setup.

Check out the amazing ULTRAVOICE UV1 at your local Behringer dealer or get yours online today. Easy has never sounded better!


Mic input

Discrete mic preamp

Type: Balanced XLR/TRS combo connector 

Impedance: 4 kΩ 

Max input level: +17 dBu 

Equivalent input noise (EIN): -126 dBu, 20 Hz - 20 kHz, 150 Ω 

Line in

¼" TRS, balanced

Impedance: 10 kΩ unbalanced, 20 kΩ balanced 

Max input level: 30 dBu 


Insert return

¼" TRS, balanced 

Impedance: 5 kΩ 

Max input level: +21 dBu 

Line out

Balanced XLR, ¼" TRS 

Impedance: 100 Ω unbalanced, 200 Ω balanced

Max output level: +20 dBu


Insert send

 ¼" TRS, balanced 

Impedance: 100 Ω unbalanced 

Max output level: +20 dBu

Mic preamp

Gain: Mic: 0 to +60 dB, line: -15 to +45 dB

48 V: +48 V phantom power, switchable

Low cut:  -18 dB/oct @ 80 Hz



Drive: Threshold, -40 dB to +20 dB

Density:  1 to 75 dB/sec



Frequency:  800 Hz to 10 kHz

Threshold: Program-dependent

Release time: Program-dependent, approx. 1 ms/dB


LF/HF detail:  Min to max boost (0 dB to +12 dB) 


Threshold: Off to +15 dB 

Ratio:  1:1 to 10:1


Output gain: -30 to +10 dB


Mix: Blend direct signal and playback 

Level:  -∞ to +6 dB

Frequency response

<10 Hz to 80 kHz (0/-3 dB) 

Dynamic range

110 dB, A-weighted 


USB 2.0, type B 


 2 in / 2 out 



Sample rates

 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz 

Supported operating systems

Windows 10 / Mac OS X 10.4 or higher 


 Windows driver available on behringer.com, no drivers needed for Mac 

Switch-mode autorange power supply

100-240 V, ~50/60 Hz

Power consumption

15 W 

Mains connection

Standard IEC connector 

Standard operating temperature range

5° C – 45° C (41° F – 113° F)


483 x 150 x 44 mm (19 x 5.9 x 1.7") 


1.5 kg (3.3 lbs)


3 Years Warranty

Shipping & Delivery

All orders over $100 will be automatically eligible for FREE Shipping Australia Wide, if you order is under $100 there will be a flat rate of $10.

Belfield Music is well known for its top online customer service. We treat all online customers with the same excellent service we give to our in store customer. We will ensure that you receive all the support you need while your goods are in transit and ensure the goods arrive promptly. All of our shipments have tracking numbers available and we cover every single unit by our own shipping insurance.     

Online orders are normally processed within 1-3 business days. Once processed, your order should take between 1-8 business days to arrive depending on your location. Please note that your order may take up to 10 business days to arrive from the day you place your order. 

If it transpires that the product is out of stock due to a stock discrepancy and/or there will be a delay in shipment, we will contact you within 2 business days of placing your order and give you the option of waiting or cancelling your order. The products we advertise online should show if they are in stock or not. We do our best to keep the website stock count up to date, but there may be an occasional error.

If you wish to utilize an Express Delivery Service to receive your item, please contact us for a shipping quote before you place your order at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.           

Deliver is made during the hours from 8:00am till 5:30pm Monday to Friday. As such, please ensure you nominate an address which is capable of receiving goods during 8am and 5.30pm.  Given the restrictions on PO Box deliveries we cannot deliver larger sized items to a PO Box.

If for any reason our selected carriers don't service your area we will contact you before processing your order if this applys to you.

Returns Policy

If you wish to return an item which is not damaged or faulty in any way and you have simply changed your mind or made the wrong decision, you must let us know within 7 days of receiving the item.  We will not agree to refund an item because you simply changed your mind or made the wrong decision if we have not been advised of your intention within 7 days of receiving your item. Once we have provided a return authority, it is the buyer’s responsibility to return the item, at their own costs within 30 days from original purchase. If the item is returned with any damage or alteration to its original packaging, we will refund the item subject to applying a minimum 15% restocking fee.  We will not refund the costs of the initial shipping charges.

It is in Belfield Music best interests to keep our customers happy with their purchases. If you are not happy with your purchase, please talk to us first. We will always attempt to resolve any problems you may have as best we can. To contact us please email us at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.