Behringer

450169

Behringer Europower EP4000 Power Amplifier 4000w

IN STOCK

Pay With AfterPay Zip

  • EUROPOWER EP4000 Powered Amp

    Product Information:

    The EP2000 and EP4000 represent everything musicians love about our popular EP1500/EP2500—excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.



    Everything You Need, Nothing You Don’t
    The über-simple front panel controls of these amps give you all of your sound’s vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

    Panel Discussion

    A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into “clipping” and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it’s an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you’re feeling lucky.


    Ultra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system’s capabilities).


    The same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.
     

  • Specifications:


    2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)


    ATR (Accelerated Transient Response) technology for ultimate punch and clarity


    Switchable limiters offer maximum output level with reliable overload protection


    Detented gain controls for precise setting and matching of sensitivity


    Precise Power, Signal and Clip LEDs to monitor performance


    XLR and 1/4" TRS input connectors for compatibility with any source


    Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems


    Selectable low-frequency filters remove damaging infra-sound frequencies


    Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers


    High-current toroidal transformer for ultra-high transient response and absolute reliability


    "Back-to-front" ventilation system including air filter for reliable operation


    "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis


    High-quality components and exceptionally rugged construction ensure long life


    Conceived and designed by BEHRINGER Germany

  • Warranty

    3 Years Warranty
  • Shipping & Delivery

    All orders over $50 will be automatically eligible for FREE Shipping Australia Wide, if you order is under $50 there will be a flat rate of $7.

    Belfield Music is well known for its top online customer service. We treat all online customers with the same excellent service we give to our in store customer. We will ensure that you receive all the support you need while your goods are in transit and ensure the goods arrive promptly. All of our shipments have tracking numbers available and we cover every single unit by our own shipping insurance.     

    Online orders are normally processed within 1-3 business days. Once processed, your order should take between 1-8 business days to arrive depending on your location. Please note that your order may take up to 10 business days to arrive from the day you place your order. 

    If it transpires that the product is out of stock due to a stock discrepancy and/or there will be a delay in shipment, we will contact you within 2 business days of placing your order and give you the option of waiting or cancelling your order. The products we advertise online should show if they are in stock or not. We do our best to keep the website stock count up to date, but there may be an occasional error.

    If you wish to utilize an Express Delivery Service to receive your item, please contact us for a shipping quote before you place your order at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.           

    Deliver is made during the hours from 8:00am till 5:30pm Monday to Friday. As such, please ensure you nominate an address which is capable of receiving goods during 8am and 5.30pm.  Given the restrictions on PO Box deliveries we cannot deliver larger sized items to a PO Box.

    If for any reason our selected carriers don't service your area we will contact you before processing your order if this applys to you.

    Returns Policy

    If you wish to return an item which is not damaged or faulty in any way and you have simply changed your mind or made the wrong decision, you must let us know within 7 days of receiving the item.  We will not agree to refund an item because you simply changed your mind or made the wrong decision if we have not been advised of your intention within 7 days of receiving your item. Once we have provided a return authority, it is the buyer’s responsibility to return the item, at their own costs within 30 days from original purchase. If the item is returned with any damage or alteration to its original packaging, we will refund the item subject to applying a minimum 15% restocking fee.  We will not refund the costs of the initial shipping charges.

    It is in Belfield Music best interests to keep our customers happy with their purchases. If you are not happy with your purchase, please talk to us first. We will always attempt to resolve any problems you may have as best we can. To contact us please email us at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.

Product Information

EUROPOWER EP4000 Powered Amp

Product Information:

The EP2000 and EP4000 represent everything musicians love about our popular EP1500/EP2500—excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.



Everything You Need, Nothing You Don’t
The über-simple front panel controls of these amps give you all of your sound’s vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

Panel Discussion

A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into “clipping” and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it’s an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you’re feeling lucky.


Ultra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system’s capabilities).


The same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.
 

Specifications

Specifications:


2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)


ATR (Accelerated Transient Response) technology for ultimate punch and clarity


Switchable limiters offer maximum output level with reliable overload protection


Detented gain controls for precise setting and matching of sensitivity


Precise Power, Signal and Clip LEDs to monitor performance


XLR and 1/4" TRS input connectors for compatibility with any source


Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems


Selectable low-frequency filters remove damaging infra-sound frequencies


Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers


High-current toroidal transformer for ultra-high transient response and absolute reliability


"Back-to-front" ventilation system including air filter for reliable operation


"Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis


High-quality components and exceptionally rugged construction ensure long life


Conceived and designed by BEHRINGER Germany

Warranty

Warranty

3 Years Warranty
Shipping & Returns

Shipping & Delivery

All orders over $50 will be automatically eligible for FREE Shipping Australia Wide, if you order is under $50 there will be a flat rate of $7.

Belfield Music is well known for its top online customer service. We treat all online customers with the same excellent service we give to our in store customer. We will ensure that you receive all the support you need while your goods are in transit and ensure the goods arrive promptly. All of our shipments have tracking numbers available and we cover every single unit by our own shipping insurance.     

Online orders are normally processed within 1-3 business days. Once processed, your order should take between 1-8 business days to arrive depending on your location. Please note that your order may take up to 10 business days to arrive from the day you place your order. 

If it transpires that the product is out of stock due to a stock discrepancy and/or there will be a delay in shipment, we will contact you within 2 business days of placing your order and give you the option of waiting or cancelling your order. The products we advertise online should show if they are in stock or not. We do our best to keep the website stock count up to date, but there may be an occasional error.

If you wish to utilize an Express Delivery Service to receive your item, please contact us for a shipping quote before you place your order at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.           

Deliver is made during the hours from 8:00am till 5:30pm Monday to Friday. As such, please ensure you nominate an address which is capable of receiving goods during 8am and 5.30pm.  Given the restrictions on PO Box deliveries we cannot deliver larger sized items to a PO Box.

If for any reason our selected carriers don't service your area we will contact you before processing your order if this applys to you.

Returns Policy

If you wish to return an item which is not damaged or faulty in any way and you have simply changed your mind or made the wrong decision, you must let us know within 7 days of receiving the item.  We will not agree to refund an item because you simply changed your mind or made the wrong decision if we have not been advised of your intention within 7 days of receiving your item. Once we have provided a return authority, it is the buyer’s responsibility to return the item, at their own costs within 30 days from original purchase. If the item is returned with any damage or alteration to its original packaging, we will refund the item subject to applying a minimum 15% restocking fee.  We will not refund the costs of the initial shipping charges.

It is in Belfield Music best interests to keep our customers happy with their purchases. If you are not happy with your purchase, please talk to us first. We will always attempt to resolve any problems you may have as best we can. To contact us please email us at admin@belfieldmusic.com.au or by using the Chat icon on the bottom right of the page.

x